In stock - Available for Immediate Despatch
UK Next Working Day Delivery available
Save 10% if you buy 2 or more - only £4.56
£5.07
In stock - Available for Immediate Despatch
UK Next Working Day Delivery available
Save 10% if you buy 2 or more - only £4.56
Price Match Promise - We won't be beaten
BuySpares Approved part
Stock No: 1589335BS
If the agitator belt on your vacuum cleaner has snapped then this pack of 2 replacement belts will have you vacuuming again in no time. They are designed to fit a selection of Electrolux models. Learn more about vacuum belts below:
What does the vacuum belt do?
The vacuum belt is a key component of an upright vacuum cleaner. Its primary function is to turn the agitator brush bar, which is used to beat dirt and dust out of the carpets. Vacuum belts are made of rubber and they are stretched between the motor pulley, which powers the belt, and the brush bar/agitator.
Is a faulty belt causing the problem?
The following faults typically indicate a problem with the vacuum belt:
o The vacuum is on but it doesn't seem to pick up
o The vacuum has the smell of burnt rubber
o The vacuum cleaner has become harder to push
o The brush roll/agitator has stopped spinning
*Remember that a snapped or loose vacuum belt is the most likely cause, but this may not be the only fault that can cause these issues to arise.
When should you replace a vacuum belt?
Vacuum belts need to be replaced as soon as they become damaged. They are designed to snap if the brush roll becomes blocked in order to protect the motor. To ensure that your vacuum cleaner maintains effective performance it is usually suggested that you replace the belt around every 4 - 6 months as they can easily become stretched. It is also recommended that you keep a spare vacuum belt in the cupboard, so you are prepared.
You can check for signs of a damaged belt by turning on the vacuum cleaner and laying it on its side. Simply look underneath the vacuum cleaner to identify if the brush bar is spinning. If the brush bar doesn't move then the belt needs to be replaced. Also when you remove a suspected worn belt it may have become mis-shaped or have visible signs of wear such as burn marks.
What causes vacuum belts to fail?
A key cause of vacuum belt failure is a blockage that stops the agitator brush bar from being able to rotate. This can be caused be numerous things, but hair and thread from the carpet becoming tangled around the brush bar is a common cause. In order to prevent future problems, you should take the time to cut away and remove any obstructions as part of your regular vacuum cleaner maintenance.
Help and tips from the appliance repair experts
1. New vacuum belts can be tight to fit. If you are struggling to fit the new belt, you may find that warming it slightly with a hairdryer may make it more pliable.
2. When your new belt arrives it may appear to be considerably shorter than the faulty one. Don't worry as the old one will just have become stretched during constant use.
Suitable for select models of Argos Value, Bush, Electrolux and John Lewis vacuum cleaners.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
Specification:
Genuine spare part
Type: ZE090 Pack of 2 If the brush roll on your vacuum cleaner is no longer turning but the motor is still running, it is likely that the belt has... More information
In stock - Available for Immediate Despatch
UK Next Working Day Delivery available
Save 10% if you buy 2 or more - only £8.65
£9.61
Pack of 2Save 10% if you buy 2 or more - only £8.65
BuySpares Approved part
Screw fit Diameter: 30.5/38mm Width: 270mm Length: 90mm 30.5mm to 37mm Screw Fit Floor Tool This universal floor tool is designed to fit vacuum tubes... More information
In stock - Available for Immediate Despatch
UK Next Working Day Delivery available
£16.05
If you're not sure what's causing the fault with your appliance or you aren't able to complete the repair yourself then our partner service, Repaircare, is just what you need.
Repaircare is a network of fully trained appliance engineers that operates nationwide. Unlike other repair services, Repaircare only offer fixed price repairs, which means that the price quoted is the price you pay.
A fixed price repair includes:
BuySpares Approved part
Stock No: 1589335BS
We constantly check our prices so you get a good deal!
Shop until 9pm and still get your order the next working day!
We aim to provide exceptional customer service
We have the UK's largest range of Spare parts & Accessories
By submitting your details you agree to our Terms and Conditions and understand our Privacy Policy
BuySpares - Buy genuine replacement spares, spare parts and accessories for all your Home and Garden Electrical Appliances
Manufacturers' names and numbers are used for reference purposes only. Prices subject to change. Errors and omissions excepted. © 2024 All rights reserved This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.We use small text files called cookies to give you the best experience on our website and help us show you relevant information.
You can choose whether to manage these or allow them all. View Cookie Policy.
We use small text files called cookies to give you the best experience on our website and help us show you relevant information. You can choose whether to manage these or allow them all.
See our cookies page for more information.