How to Replace the Lamp in a Refrigerator

    If the light in your fridge is no longer working, it is most likely that the bulb has blown. This can be expected to happen after a period of time and use. In this video we show you how to remove and replace the bulb in a fridge.

    For information on how to confirm a fault on a Fridge-freezer see our other articles. »

    Tools that you will need

    • No special tools required for this product
    • Soft cloth: to protect hands whilst fitting

    Video Transcript: How to Replace the Lamp in a Refrigerator

    IMPORTANT: BEFORE REPLACING A PART IN ANY ELECTRICAL APPLIANCE, YOU MUST ENSURE THAT THE APPLIANCE IS FIRST UNPLUGGED FROM THE MAINS.

    No specific tools are required for this process, however you may find it handy to use a flat screwdriver.

    First remove the lamp cover by pressing in the clips on the front edge of the cover. The location of the lamp may vary according to your brand of fridge, but it's usually at the top or the side of the fridge.

    Next, fully unscrew the lamp and gently remove it.

    Screw in the new lamp and replace the lamp cover by inserting at the back first, and then clicking into place at the front.

    To prevent seal gaps warm it up with a hair dryer and gently stretch the seal, this will set into its new position when closed and left to cool.

    * All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.