Order by Phone: 0844 557 5575 | 7p per min + your network access charge

    Order by Phone: 0844 557 5575 | 7p per min + your network access charge

    UK Monday delivery - Order by 2pm Sunday UK Monday delivery - Order by 2pm Sunday

    How to Replace a Dishwasher Fascia Hotpoint or Indesit

    If the control panel on your dishwasher is cracked or damaged this is how to replace it.

    For information on how to confirm a fault on a dishwasher see our other articles. »

    Tools that you will need

    Parts that you will need

    Video Transcript: How to Replace a Dishwasher Fascia Hotpoint or Indesit

    Welcome to Buyspares

    In this video we will show you how to replace a fascia panel on a Hotpoint dishwasher.

    IMPORTANT: BEFORE REPLACING A PART IN ANY ELECTRICAL APPLIANCE, YOU MUST ENSURE THAT THE APPLIANCE IS FIRST UNPLUGGED FROM THE MAINS.

    If your fascia panel is cracked or damaged you need to replace it.

    Take extra care with the inner door as this has very sharp edges once dismantled.

    Remove the outer panel by removing these screws, and lift away.

    Remove the control knob.

    Next remove the control panel from the inner door by undoing these screws.

    Undo the selector switch, and remove the control board and the door lock.

    Remove the button and power switch by squeezing these clasps here.

    Transfer these parts, along with the light guide and relevant screws to the new panel, and redress the cables.

    Refit the control panel to the inner door.

    Finally refit the door panel, before testing the dishwasher.

    For all the spares you need visit the BuySpares website.

     Dishwasher Spares and Accessories

    * All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.