• Home
• Advice Centre
• How to Remove the Door from a Dishwasher

Video Transcript: How to Remove the Door from a Dishwasher

IMPORTANT: BEFORE REPLACING A PART IN ANY ELECTRICAL APPLIANCE, YOU MUST ENSURE THAT THE APPLIANCE IS FIRST UNPLUGGED FROM THE MAINS.

Open the door fully and remove the screws from round the edge - remember to put them somewhere safe so you can replace them later. Be very careful to keep hold of the door as you unscrew to make sure it doesn't fall away.

Carefully place the front of the door down, taking care to avoid any sharp edges especially around the inside section of the door.

You'll have to disconnect some of the wires to get easy access to the components; we recommend you take a photo of the location of the wires so you know where to replace them later.

To fit the door back together, firstly plug the wires back in making sure they're replaced in the correct formation.

Then, carefully push the two halves of the door back together and rest them back down, holding them together so the inner section doesn't pop back up.

Replace the screws around the edges and screw them back on tightly.