Order by Phone: 0844 557 5575 | 7p per min + your network access charge

    Order by Phone: 0844 557 5575 | 7p per min + your network access charge

    UK Next day delivery available Monday-Friday until 9pm UK Next day delivery available Monday-Friday until 9pm

    Vacuum Cleaner Agitator Belt (Pack Of 2)

    BuySpares Approved part

    £2.50 Pack of 2

    Save 10% if you buy 2 or more - only £2.25

    Vacuum Cleaner Agitator Belt (Pack Of 2)

    Vacuum Cleaner Agitator Belt (Pack Of 2)

    £2.50

    UK Next Day Delivery. Order Within:

    UK Next Day Delivery UK Next Day Delivery. Order Within:

    BuySpares Approved part

    Stock No: 2418572BS

    • Product Description

      This pack of 2 belts designed to fit the Panasonic MCE4000 series is the perfect replacement for your vacuum cleaner. Learn more about vacuum belts below:

      What does the vacuum belt do?
      The vacuum belt is a key component of an upright vacuum cleaner. Its primary function is to turn the agitator brush bar, which is used to beat dirt and dust out of the carpets. Vacuum belts are made of rubber and they are stretched between the motor pulley, which powers the belt, and the brush bar/agitator.

      Is a faulty belt causing the problem?
      The following faults typically indicate a problem with the vacuum belt:

      o The vacuum is on but it doesn't seem to pick up
      o The vacuum has the smell of burnt rubber
      o The vacuum cleaner has become harder to push
      o The brush roll/agitator has stopped spinning
      *Remember that a snapped or loose vacuum belt is the most likely cause, but this may not be the only fault that can cause these issues to arise.

      When should you replace a vacuum belt?
      Vacuum belts need to be replaced as soon as they become damaged. They are designed to snap if the brush roll becomes blocked in order to protect the motor. To ensure that your vacuum cleaner maintains effective performance it is usually suggested that you replace the belt around every 4 - 6 months as they can easily become stretched. It is also recommended that you keep a spare vacuum belt in the cupboard, so you are prepared.

      You can check for signs of a damaged belt by turning on the vacuum cleaner and laying it on its side. Simply look underneath the vacuum cleaner to identify if the brush bar is spinning. If the brush bar doesn't move then the belt needs to be replaced. Also when you remove a suspected worn belt it may have become mis-shaped or have visible signs of wear such as burn marks.

      What causes vacuum belts to fail?
      A key cause of vacuum belt failure is a blockage that stops the agitator brush bar from being able to rotate. This can be caused be numerous things, but hair and thread from the carpet becoming tangled around the brush bar is a common cause. In order to prevent future problems, you should take the time to cut away and remove any obstructions as part of your regular vacuum cleaner maintenance.

      How to replace a vacuum belt:

      1. Unplug the vacuum cleaner from the mains power supply. Then locate the plate or housing that retains the agitator brush.
      2. Remove the plate or housing in order to gain access to the belt. There may be screws on some models. Discard the old belt.
      3. Fit the replacement belt by stretching it from the brush roll to the motor drive shaft. You may need to use a screwdriver to stretch the belt across.
      4. Check the brush bar turns freely with the new belt attached and then simply refit the housing.
      *This is a general guide to replacing a faulty belt on an upright vacuum cleaner. The process may vary slightly depending on the model and brand of vacuum you own.

      Help and tips from the appliance repair experts

      1. New vacuum belts can be tight to fit. If you are struggling to fit the new belt, you may find that warming it slightly with a hairdryer may make it more pliable.
      2. When your new belt arrives it may appear to be considerably shorter than the faulty one. Don't worry as the old one will just have become stretched during constant use.

      While you're replacing the belt, why not…
      Replace the filters in the vacuum cleaner. These can easily become clogged and this can impede the airflow, which can cause the vacuum to lose suction and become less effective. It is also the ideal time to check you haven't lost any of the vacuum tools such as the crevice nozzle or upholstery tool.

      Suitable for select models of Homedream and Panasonic vacuum cleaners.

      Please check the list of suitable models to ensure that this spare part will fit your appliance.

      • Large belt fits between the brush and the pulley
      • Small belt fits between the motor and the pulley
      • Includes x 2 belts
      • Manufacturers’ names and numbers are used for reference purposes only. These parts are in no way associated with the initial manufacturers parts
      • Panasonic Outlet Filter

        Genuine consumable

        The outlet filter sits in the motor case of your Panasonic vacuum cleaner. A well maintained vacuum is sure to provide you better results, and replacing... More information

        In stock

        Next Day UK Delivery available

        Save 10% if you buy 2 or more - only £2.25

        £2.50

        Save 10% if you buy 2 or more - only £2.25

        Panasonic U-20E Paper Dust Bag (Pack Of 5)

        Genuine consumable

        Type: U20E Includes x 5 Dust Bags Cardboard collar Double skin bag Also Known As: Paper Bag, Vacuum Bag, Cloth Bag Your vacuum cleaner features a... More information

        In stock

        Next Day UK Delivery available

        Save 10% if you buy 2 or more - only £8.09

        £8.99

        Pack of 5

        Save 10% if you buy 2 or more - only £8.09

        Universal 30 To 36mm Screw Fit Flexi Crevice Tool

        BuySpares Approved part

        Fits externally to 30-36 mm Vacuum Hoses & Extension Tubes Detachable Brush Length:63 cm Perfect for cleaning behind cabinets and in between awkward... More information

        In stock

        Next Day UK Delivery available

        £10.46

        Universal Vacuum Cleaner Screw Fit Floor Tool - 30.5mm To 37mm

        BuySpares Approved part

        Supplied with screw fit collar and pip fitting collar Adjustable fitting (30.5 to 37mm*) suitable for almost every make of vacuum cleaner (not Dyson)... More information

        In stock

        Next Day UK Delivery available

        £12.79

        Universal 30 - 37mm Screw Fit Dustmaster Lint Tool

        BuySpares Approved part

        Fits externally to 30-37 mm Vacuum Hoses & Extension Tubes Adapts to fit most vacuums Designed for maximum pick-up and fast removal of cat, dog and... More information

        In stock

        Next Day UK Delivery available

        £10.99

        Universal Vacuum Cleaner Micro Filter (Cut To Size)

        BuySpares Approved part

        Dimensions : 255 x 205 mm Cut to size A well-maintained vacuum is sure to provide you better results, and replacing the filters on a regular basis... More information

        In stock

        Next Day UK Delivery available

        Save 10% if you buy 2 or more - only £3.59

        £3.99

        Save 10% if you buy 2 or more - only £3.59

      • Repaircare - We Fix appliances

        If you're not sure what's causing the fault with your appliance or you aren't able to complete the repair yourself then our partner service, Repaircare, is just what you need.

        Repaircare is a network of fully trained appliance engineers that operates nationwide. Unlike other repair services, Repaircare only offer fixed price repairs, which means that the price quoted is the price you pay.

        A fixed price repair includes:

        • Call-out
        • Diagnosis
        • Labour
        • Safety check
        • All required parts!
    • Reviews

    BuySpares Approved part

    Stock No: 2418572BS