Siemens Universal Permanent Half-Brick Vent Kit

If your tumble dryer is producing unwanted condensation inside your room, use this Universal Permanent Half-Brick Vent Kit to provide an easy venting solution. Replace a brick in the outdoors-adjacent room in your home that you wish to vent, and conveniently reduce moisture or smoke inside your home.

The versatile kit includes all of the components needed to install a vent on a wall in your home and the accessories to ensure this kit connects to your tumble dryer. Ideal for use with dryers, this kit is the solution to domestic venting requirements.

Fitting Instructions:

1. Before drilling a hole, make sure there are no cables or pipes behind the wall
2. Select half a brick width to remove
3. Push the vent duct through the drilled hole in the wall
4. Fix the exterior grill vent by drilling four holes
5. Secure the exterior vent with the supplied screws and rawlplugs
6. Drill and screw the interior wall plate over the vent duct, with the supplied rawlplugs and screws
7. The vent duct can be cut to leave a 30mm section protruding into the room
8. Attach the rectangular to round adaptor to the vent duct internally, attaching the venting hose (not supplied)

Please note: This product does not include a venting hose. Please ensure there are no folds or kinks within the vent hose as this could restrict airflow.

Fits most appliances easily, but please check your appliance dimensions to ensure that this product is suitable:

• Kit includes:
• 1 screw pack (8 Screws & 8 Raw plugs)
• 1 Wall Plate
• 1 short round to rectangular adaptor
• 1 White gravity grill with rectangular spigot
• 1 Flat Channel 110 x54 x360mm length
• 4" hose diameter
• Fits through the wall replacing one brick
• Manufacturers’ names and numbers are used for reference purposes only. These parts are in no way associated with the initial manufacturers parts

Manufacturers Part Number

• VNT200

EAN

• 5031681307084