- Contact Us
- Terms & Conditions
- Price Match Promise
- Sign In
-
₤
(change)
- Home
- Kitchen Appliances
- Washers & Dryers
- Floorcare
-
Garden
- Garden
- Spare Parts
- Chainsaw
- Garden Vac
- Grass Trimmer
- Hedge Trimmer
- Lawn Rake
- Lawnmower
- Pressure Washer
- DIY Power Tools
- Shears
- Shredder
- Garden Tractor
- Our Range of Garden Accessories
- Garden Accessories
- Our Range of Garden Watering
- Garden Watering
- Shop By Brand
- Computing
-
Photography
- Photography
- Spares & Accessories
- Camera
- Camcorder
- Universal Accessories
- Shop By Brand
- Sound & Vision
-
Household
- Household
- Home and Garden Cleaning Essentials
- All Purpose Cleaning
- Fabric Care
- Appliance Cleaning
- Garden Essentials
- Spares & Accessories
- Energy Saving
- Personal Care
- Kitchen Accessories
- Office Accessories
- General Accessories
- Shaver
- Cables & Connectors
- Batteries & Chargers
- Lighting & Bulbs
- Electrical Accessories
- Household Safety
- Pest Control
- Smart Home
- Advice Centre
-
Sites by Country
-
Currency / Delivery Country
-
If your tumble dryer is tripping the electricity, blowing fuses or simply not heating the problem may be a faulty heater. Here is how to replace it.
Video Transcript: How to Replace a Tumble Dryer Heater (LG)
Welcome to BuySpares, in this video we will be showing you how to replace an LG tumble dryer heater.
Important: before replacing a part in any electrical appliance, you must ensure that the appliance is first unplugged from the mains.
If your tumble dryer is not heating or its tripping your electric supply it may be due to a faulty heater and may need replacing.
To replace the heater first remove the top panel, then remove the side panel.
Remove all the screws around the heater cover panel and lift it off.
Remove the heater plugs and screw from their connector, and remove the mounting screws.
Lift the old heater away and fit the new heater in position using the mounting screws.
Refit the plugs and the heater cover.
Locate the side panel onto the pegs on the base and slide onto the mounting hooks on the front before re-screwing.
Refit the lid and test if required.
For all the spares you need visit www.buyspares.co.uk
* All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.
