- Contact Us
- Terms & Conditions
- Price Match Promise
- Sign In
-
₤
(change)
- Home
- Kitchen Appliances
- Washers & Dryers
- Floorcare
-
Garden
- Garden
- Spare Parts
- Chainsaw
- Garden Vac
- Grass Trimmer
- Hedge Trimmer
- Lawn Rake
- Lawnmower
- Pressure Washer
- DIY Power Tools
- Shears
- Shredder
- Garden Tractor
- Our Range of Garden Accessories
- Garden Accessories
- Our Range of Garden Watering
- Garden Watering
- Shop By Brand
- Computing
-
Photography
- Photography
- Spares & Accessories
- Camera
- Camcorder
- Universal Accessories
- Shop By Brand
- Sound & Vision
-
Household
- Household
- Home and Garden Cleaning Essentials
- All Purpose Cleaning
- Fabric Care
- Appliance Cleaning
- Garden Essentials
- Spares & Accessories
- Energy Saving
- Personal Care
- Kitchen Accessories
- Office Accessories
- General Accessories
- Shaver
- Cables & Connectors
- Batteries & Chargers
- Lighting & Bulbs
- Electrical Accessories
- Household Safety
- Pest Control
- Smart Home
- Advice Centre
-
Sites by Country
-
Currency / Delivery Country
-
If your dryer is not turning the drum but you can hear the motor running, the belt may have broken.. Follow our video to find out how to replace it.
Video Transcript: How to Replace the Belt on an Indesit or Hotpoint Vented Dryer
Welcome to BuySpares, in this video we're going to show you how to replace a belt in the Indesit or Hotpoint vented dryer.
Important: before replacing a part in any electrical appliance, you must ensure that the appliance is first unplugged from the mains.
If your dryer is not moving the clothing in the drum it is likely the belt is broken and youll need to replace it.
Remove the lid and then remove the kick plate and the right side panel.
Remove the screws on the back edge of the left panel, this will allow you to move the front away from the drum mounting.
Drop the new belt through the gap, lift it over the drum before fitting back onto the front supports.
Refit the left side panel and screw it into place.
Use a lever or screwdriver to stretch the new belt onto the motor.
Make sure the front panel is upright, the drum is in the correct position and gently turn the drum to ensure the belt remains in position.
Refit the side panel, kick plate and top and retest the machine.
For all the spares you need visit www.buyspares.co.uk
* All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.
