Luna Drive Belt - Pack Of 2

    BuySpares Approved part

    £2.50 Pack of 2

    Save 10% if you buy 2 or more - only £2.25

    Luna Drive Belt - Pack Of 2

    Luna Drive Belt - Pack Of 2

    £2.50

    BuySpares Approved part

    Stock No: 2330851BS

    • Product Description

      This agitator belt is ideal as a replacement if the existing one has broken. Learn more about vacuum belts below:

      What does the vacuum belt do?
      The vacuum belt is a key component of an upright vacuum cleaner. Its primary function is to turn the agitator brush bar, which is used to beat dirt and dust out of the carpets. Vacuum belts are made of rubber and they are stretched between the motor pulley, which powers the belt, and the brush bar/agitator.

      Is a faulty belt causing the problem?
      The following faults typically indicate a problem with the vacuum belt:

      o The vacuum is on but it doesn't seem to pick up
      o The vacuum has the smell of burnt rubber
      o The vacuum cleaner has become harder to push
      o The brush roll/agitator has stopped spinning
      *Remember that a snapped or loose vacuum belt is the most likely cause, but this may not be the only fault that can cause these issues to arise.

      When should you replace a vacuum belt?
      Vacuum belts need to be replaced as soon as they become damaged. They are designed to snap if the brush roll becomes blocked in order to protect the motor. To ensure that your vacuum cleaner maintains effective performance it is usually suggested that you replace the belt around every 4 - 6 months as they can easily become stretched. It is also recommended that you keep a spare vacuum belt in the cupboard, so you are prepared.

      You can check for signs of a damaged belt by turning on the vacuum cleaner and laying it on its side. Simply look underneath the vacuum cleaner to identify if the brush bar is spinning. If the brush bar doesn't move then the belt needs to be replaced. Also when you remove a suspected worn belt it may have become mis-shaped or have visible signs of wear such as burn marks.

      What causes vacuum belts to fail?
      A key cause of vacuum belt failure is a blockage that stops the agitator brush bar from being able to rotate. This can be caused be numerous things, but hair and thread from the carpet becoming tangled around the brush bar is a common cause. In order to prevent future problems, you should take the time to cut away and remove any obstructions as part of your regular vacuum cleaner maintenance.

      Help and tips from the appliance repair experts
      1.
      New vacuum belts can be tight to fit. If you are struggling to fit the new belt, you may find that warming it slightly with a hairdryer may make it more pliable.
      2. When your new belt arrives it may appear to be considerably shorter than the faulty one. Don't worry as the old one will just have become stretched during constant use.

      Please check model fit list to ensure this part is correct for your model.

      Specification:

      • DBB/0025 belt
      • Pack of 2
      • Manufacturers’ names and numbers are used for reference purposes only. These parts are in no way associated with the initial manufacturers parts
      • Vax Permanent Hepa Filter

        Genuine consumable

        PLEASE NOTE: Check Model Fit List As This Filter Does Not Fit All Versions Of The U91. A spare central HEPA filter for your Vax bagless upright vacuum... More information

        In stock

        Express Delivery available

        Save 10% if you buy 2 or more - only £17.99

        £19.99

        Save 10% if you buy 2 or more - only £17.99

        Universal 30 - 37mm Screw Fit Dustmaster Lint Tool

        BuySpares Approved part

        Fits externally to 30-37 mm Vacuum Hoses & Extension Tubes Adapts to fit most vacuums Designed for maximum pick-up and fast removal of cat, dog and... More information

        In stock

        Express Delivery available

        £11.76

        Universal Vacuum Cleaner Micro Filter : 255x205mm (Cut To Size)

        BuySpares Approved part

        Dimensions : 255 x 205 mm Cut to size A well-maintained vacuum is sure to provide you better results, and replacing the filters on a regular basis... More information

        In stock

        Express Delivery available

        Save 10% if you buy 2 or more - only £3.74

        £4.16

        Save 10% if you buy 2 or more - only £3.74

      • Repaircare - We Fix appliances

        If you're not sure what's causing the fault with your appliance or you aren't able to complete the repair yourself then our partner service, Repaircare, is just what you need.

        Repaircare is a network of fully trained appliance engineers that operates nationwide. Unlike other repair services, Repaircare only offer fixed price repairs, which means that the price quoted is the price you pay.

        A fixed price repair includes:

        • Call-out
        • Diagnosis
        • Labour
        • Safety check
        • All required parts!
    • Reviews

    BuySpares Approved part

    Stock No: 2330851BS