How to Replace the Wheel on an iRobot Roomba Vacuum Cleaner

If your iRobot's wheel becomes worn or broken, you will need to replace it with a new one.

This video shows how to remove and replace the wheel in an iRobot Roomba vacuum cleaner.

For information on how to repair Vacuum and cleaner advice and problems see our other articles.

Tools that you will need

Screwdriver: Philips or crosspoint type »

Parts that you will need

iRobot Wheel »

IRobot spares »

Video Transcript: How to Replace the Wheel on a iRobot

IMPORTANT: BEFORE REPLACING A PART IN ANY ELECTRICAL APPLIANCE, YOU MUST ENSURE THAT THE APPLIANCE IS FIRST UNPLUGGED FROM THE MAINS.

In order to replace the module you need to unscrew the first 4 screws and then remove the screw that's attached to the side brush, you should now be able to lift the base off.

Once the base has been removed, you should now be able to see the 5 modules. These are the side brush, left wheel, right wheel, vacuum bin and cleaning head module.

To replace the left wheel module there are just 3 screws that need to be removed and to replace the wheel, put the new one in and tighten the screws.

* All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.