Order by Phone: 0844 557 5575 | 7p per min + your network access charge

    Order by Phone: 0844 557 5575 | 7p per min + your network access charge

    UK Next day delivery available Monday-Friday until 9pm UK Next day delivery available Monday-Friday until 9pm

    How to Replace the Door Seal on an Atag Oven

    After a period of time and use, the door seal on your oven will become worn and may start to come away, allowing heat to escape when the oven is in use. In this video we show you how to remove and replace the door seal on an oven.

    For information on how to confirm a fault on a cooker, oven or hob see our other articles. »

    Tools that you will need

    Parts that you will need

    Video Transcript: How to Replace the Door Seal on an Atag Oven


    IMPORTANT: BEFORE REPLACING A PART IN ANY ELECTRICAL APPLIANCE, YOU MUST ENSURE THAT THE APPLIANCE IS FIRST UNPLUGGED FROM THE MAINS.

    First, open the oven door fully, then to remove the old door seal, hold it at one corner and lift it up and towards you. Repeat this at the other corners until the seal has completely come away from the oven.

    To fit the new seal, start at one corner, and press the tab on the seal into the middle hole in the corner. Repeat this in each corner until the seal is fully secured. The oven is now ready to be plugged in and used.

    Please bear in mind that the method of removing an oven door seal may vary according to your brand of oven.

    Cooker Spares

    Get the Part: View our range of Oven Spares

    * All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.