Order by Phone: 0844 557 5575 | 7p per min + your network access charge

    Order by Phone: 0844 557 5575 | 7p per min + your network access charge

    UK Next day delivery available Monday-Friday until 6pm UK Next day delivery available Monday-Friday until 6pm

    How to Replace a Washing Machine Drain Hose

    If the hose on your washing machine is damaged or leaking this is how to replace it.

    For information on how to tackle and resolve faults and problems on a wide range of appliances see our other articles »

    Tools that you will need

    Video Transcript: How to Replace a Washing Machine Drain Hose

    Welcome to BuySpares.

    In this video we will show you how to replace the drain hose on a washing machine.

    Important: before replacing a part in any electrical appliance, you must ensure that the appliance is first disconnected from the mains.

    Disconnect the hoses and carefully lower the machine onto its side on carpet or an old towel.

    Remove the base panel if fitted, unscrew the hose clip at the pump and remove the hose through the cabinet hole.

    Refit the new hose and hose clip, lift the machine upright and reconnect the water supply, run a test cycle if required.

    For all the spares you need visit the BuySpares website.

    * All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.