Important: before replacing a part in any electrical appliance, you must ensure that the appliance is first disconnected from the mains electricity.

Remove the clamp that holds the door seal in place and fold the seal into the drum. Undo the locks screws and remove the lock. Take a photo showing the wiring detail before replacing the lock.

Reassemble using your reference photos, replace the seal around the outside edge of the front panel, place a small clamp and into the groove around the edge of the seal.

Check that the door fits correctly by running a rinse cycle to check for leaks before you start using machines.

For all the spares you need visit www.buyspares.co.uk

* All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.