Order by Phone: 0844 557 5575 | 7p per min + your network access charge

    Order by Phone: 0844 557 5575 | 7p per min + your network access charge

    UK Sunday delivery - Order by 2pm Saturday UK Sunday delivery - Order by 2pm Saturday

    How to Fix a Smeg Dishwasher Door Handle

    If the handle on your Smeg dishwasher has broke it may be difficult to open the door. We show how easy this is to replace.

    For information on how to confirm a fault on a dishwasher see our other articles. »

    Tools that you will need

    Parts that you will need

    Video Transcript: How to Fix a Smeg Dishwasher Door Handle

    Welcome to BuySpares.

    In this video will show how to change the door handle on a Smeg dishwasher.

    IMPORTANT: BEFORE REPLACING A PART IN ANY ELECTRICAL APPLIANCE, YOU MUST ENSURE THAT THE APPLIANCE IS FIRST UNPLUGGED FROM THE MAINS.

    If your handle appears loose and does not engage the lock correctly it is likely to be broken and you will need to replace it.

    Open the door and release the control panel by removing these six screws.

    Next ease the control panel up and out being careful of the sharp edges on the door liner.

    Lift out the broken handle and fit the new handle into the support pillars making sure it connects to the lock assembly.

    Lower the control panel back into the door before refitting the screws.

    Close and test the handle is operating correctly before running a test cycle.

    For all the spares you need visit the BuySpares website.

     Dishwasher Spares and Accessories

    * All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.