How to Change the Lamp in a DeDietrich Oven

If the light in your oven is no longer working, it is most likely that the bulb has blown. This can be expected to happen after a period of time and use.
In this video we show you how to remove and replace the lamp in an oven.

For information on how to confirm a fault on a cooker, oven or hob see our other articles.

Tools that you will need

Soft cloth: to protect hands whilst fitting

Blanket or mat: to lower product onto to protect

Parts that you will need

Replacement Oven Bulb

Video Transcript: How to Change the Lamp in a DeDietrich Oven

IMPORTANT: BEFORE REPLACING A PART IN ANY ELECTRICAL APPLIANCE, YOU MUST ENSURE THAT THE APPLIANCE IS FIRST UNPLUGGED FROM THE MAINS.

Open the oven door and locate the position of the lamp, remove the glass covering by unscrewing it.

The bulb should either unscrew or pull out. If it pulls out, this is a halogen bulb and the new bulb should not be touched by hands, but handled using a soft clean tissue.

Fit the new bulb into place, and replace the covering.

Please bear in mind that the location and type of lamp may vary according to your brand of oven.

Get the Part: View our range of oven spares

* All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.