How to replace the metal blade on a Flymo Compact 300 lawnmower

A blunt lawnmower blade can make your lawn look unhealthy and uneven. This video shows you how to replace the metal blade on a Flymo Compact 300 lawnmower.

What you'll need: Flymo Metal Blade

Video Transcript: How to replace metal blades on a Flymo Compact 300

IMPORTANT: BEFORE REPLACING A PART IN ANY ELECTRICAL APPLIANCE, YOU MUST ENSURE THAT THE APPLIANCE IS FIRST UNPLUGGED FROM THE MAINS

Lawnmowers with metal blades will usually use a blade bolt to keep the blades in place. This will need to be removed using a spanner to access the blade. Gloves are a must when handling metal blades.

Replacing Metal Lawnmower Blades

1. Safety first. Make sure your lawnmower is unplugged from the power supply.
2. Identify what type of blade your lawnmower uses. Remember to wear protective gloves when handling blades.
3. Loosen and remove the blade bolt.
4. Remove the old/faulty blade and unpack the replacement ready to fit.
5. Fit the new blade on top of the cutting height spaces and secure in place with the blade bolt.
6. Tighten the blade bolt, check and test.

Get the Part: View our range of Flymo spares and Garden Accessories

* All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.