How to Replace the Heater on a Beko Tumble Dryer

    If your dryer runs but fails to heat check the heater element and thermostats attached. If either have failed here is how to replace them.

    For information on how to tackle and resolve faults and problems on a wide range of appliances see our other articles »

    Tools that you will need

    Video Transcript: How to Replace The Heater on a Beko Tumble Dryer (Beko)

    Welcome to BuySpares, in this video we will be showing how to replace a heater in a Beko tumble dryer.

    Important: before replacing a part in any electrical appliance, you must ensure that the appliance is first unplugged from the mains.

    Start by undoing these screws to take of the heater cover, lift the cover away before unplugging the connector.

    To remove the heater, take out these screws and unhook the heater from the back panel.

    Fit the new heater and it screws and reconnect the plug, refit the heater cover before testing the repair.

    For all tumble dryer spare parts, visit BuySpares.

    * All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.