How to Replace the Cutting Disc on a Flymo Microlite Lawnmower

A blunt or broken cutting disc can give your grass an uneven cut and lead to an unhealthy lawn. This video shows you how to replace the cutting disc on a Flymo Microlite lawnmower.

For information on how to repair Lawnmower problems see our other articles. »

Tools that you will need

No special tools required for this product

Parts that you will need

Flymo Cutting Disk »

Flymo spares »

Gardening accessories »

RCD safety device »

Video Transcript: How to Replace the Cutting Disc on a Flymo Microlite

IMPORTANT: BEFORE REPLACING A PART IN ANY ELECTRICAL APPLIANCE, YOU MUST ENSURE THAT THE APPLIANCE IS FIRST UNPLUGGED FROM THE MAINS.

If the cutting disc on your Flymo hover mower is damaged it should be replaced as soon as possible.

First make sure the mower is unplugged, take hold of the impeller like this, and unlock the cutting disc by turning it anti-clockwise so you can remove it. Take the new cutting disc and push it back onto the hub making sure it clicks in, then turn clockwise to lock it in place.

You can use the cutting disc to determine the length of your cut. To get a short cut keep it like this, but if you want your grass a bit longer, you just need to flip it over like this, and lock it into place.

When using any electrical tools in the garden always use a RCD safety device

* All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.