How to Replace the Cutting Blades on a Flymo Microlite Lawnmower

    Blunt lawnmower blades can make your lawn look unhealthy and uneven. This video shows you how to replace the cutting blades on a Flymo Microlite lawnmower.

    For information on how to repair lawnmower problems see our other articles. »

    Tools that you will need

    • No special tools required for this product

    Video Transcript: How to Replace the Cutting Blades on a Flymo

    IMPORTANT: BEFORE REPLACING A PART IN ANY ELECTRICAL APPLIANCE, YOU MUST ENSURE THAT THE APPLIANCE IS FIRST UNPLUGGED FROM THE MAINS.

    Many hover mowers are fitted with interchangeable plastic blades, these are usually straight forward to change but you should always consult the manufacturer's manual where possible.

    Replacing Lawnmower Blades:

    1: Identify what type of blade your lawnmower uses. Remember to wear protective gloves when handling blades.

    2: Grip the flat of the blade firmly using your thumb and first finger.

    3: Push the blade inwards and up out of the holding to remove.

    4: Slot the replacement blade in place and clip into position.

    When using any electrical tools in the garden always use a RCD safety device

    * All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.