How to Replace a Bosch Tumble Dryer Door Handle

A common failure on some Bosch tumble dryers can be the door handle fails making opening difficult. This simple repair is shown in the following video.

For information on how to tackle and resolve faults and problems on a wide range of appliances see our other articles »

Tools that you will need

Screwdriver: Torx T15 type »

Screwdriver: flat blade type »

Parts that you will need

Door Handle »

Tumble Dryer Balls »

Tumble Dryer Spare Parts »

Video Transcript: How to Replace a Bosch Tumble Dryer Door Handle

Welcome to BuySpares, in this video we will show you how to change the door handle on this Bosch tumble dryer.

Important: Before replacing a part in any electrical appliance, you must ensure that the appliance is first unplugged from the mains.

The handles on these dryers can break, either from accidental impact or from repeatedly pulling at the wrong angle when opening them.

To replace, open the door and if required carefully use a screwdriver or blunt knife to lever open.

Take out the three mounting screws. You may need to access and hold the screw pillars to prevent them turning as you do this.

Fit the new handle on and refit the screws.

For all the spares you need visit the BuySpares website.

* All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.