How to change the lamp on an Atag oven

If the light in your oven is no longer working, it is most likely that the bulb has blown. This can be expected to happen after a period of time and use. In this video we show you how to remove and replace the lamp in an oven.

What you'll need: Replacement Atag Lamp

Video Transcript: How to change the lamp on an Atag oven

IMPORTANT: BEFORE REPLACING A PART IN ANY ELECTRICAL APPLIANCE, YOU MUST ENSURE THAT THE APPLIANCE IS FIRST UNPLUGGED FROM THE MAINS

Open the oven door and locate the position of the lamp.

Remove the glass covering by unscrewing it, and carefully remove the bulb by unscrewing.

Screw the new bulb into place, and replace the covering.

Please bear in mind that the location and type of lamp may vary according to the brand of oven.

Get the Part: View our range of atag oven spares

* All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.