How to Change a Dishwasher Drain Hose (Gorenje)

If the drain hose on your dishwasher becomes damaged or faulty, it will need replacing to prevent leaks. Find out how to change a dishwasher drain hose, by watching this video.

For information on how to confirm a fault on a dishwasher see our other articles. »

Tools that you will need

Screwdriver: Philips or crosspoint type »

Screwdriver: flat blade type »

Screwdriver: Torx type »

Work gloves »

Parts that you will need

Dishwasher Drain Hose»

Video Transcript: How to Change a Dishwasher Drain Hose (Gorenje)

Welcome to BuySpares.

How to replace a dishwasher drain hose.

IMPORTANT: BEFORE REPLACING A PART IN ANY ELECTRICAL APPLIANCE, YOU MUST ENSURE THAT THE APPLIANCE IS FIRST UNPLUGGED FROM THE MAINS.

If the drain hose is damaged and leaking, or needs replacing with a longer one here's how to fix it.

Disconnect the machine and drain the sump with a sponge.

Remove the base fixing screws, and move it out to disconnect the hose from the pump.

Remove these screws and loosen the side panel if required before removing the top metal bracket and lifting out the hose.

Fit the hose on the pump.

Fit the hose end into the base and refit the metal bracket, and then replace the base panel. Lift the appliance upright and reconnect it.

For all the spares you need visit the BuySpares website.

* All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.