How to Remove and Replace the Motor in a Fan Oven Using a Universal Part.
Welcome to BuySpares.
In this video we will be showing you how to replace an oven fan motor with a universal part.
IMPORTANT: BEFORE REPLACING A PART IN ANY ELECTRICAL APPLIANCE, YOU MUST ENSURE THAT THE APPLIANCE IS FIRST UNPLUGGED FROM THE MAINS.
If you're oven fan is noisy or not turning when using its on the fan setting
you may have a faulty fan motor and need to replace it.
Buyspares can supply the original parts for most appliances.However; if this is not available or if you would like a more economical alternative
to an original. We also stock a wide range of alternative
These are usually made to the same quality as the original part
but there are a number of different types of universal fan motors, and it is important you have checked the image and dimensions to confirm the motor is suitable to replace your one.
Sometimes with a little modification a motor can be made to fit correctly when a direct replacement is not available.
ur website has many reviews saying how the have been used as suitable replacements
on a number of appliances.
Remove the door and the element cover by taking out the screws.
Undo the fan nut by turning clockwise and remove the fan.
Remove the back panel and the screws locating the motor.
Then carefully lift the motor away and disconnect the wires transferring these to the new motor.
Refit the motor and the rear panel.
Refit the fan and its cover.
And finally the door.
Turn on and reset the timer to manual if fitted before retrying the repair.
For all the spares you need visit www.buyspares.co.uk
* All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.