How to Replace a Washing Machine Door Seal (Samsung)

    If the door seal on your washing machine is damaged or covered in dirt, it has the potential to result in leaks. Find out how to replace the washing machine door seal on a Samsung, by watching this video.

    For information on how to tackle and resolve faults and problems on a wide range of appliances see our other articles »

    Tools that you will need

    Video Transcript: How to Replace a Washing Machine Door Seal (Samsung)

    Welcome to BuySpares.

    In this video we'll be showing you how to change the door seal on a Samsung washing machine.

    Important: before replacing a part in any electrical appliance, you must ensure that the appliance is first disconnected from the mains.

    Start by removing the top panel.

    Next remove the seal from the front panel.

    Now we can unscrew the seal clamp and lift off the seal.

    When refitting the seal use a little dish washing soap to lubricate the lip, and help it slip into place, before fitting and tightening the clamp.

    Reattach the seal and its clamp.

    Refit the lid and run a test cycle to check for leaks.

    For all the spares you need visit the BuySpares website.

    * All information provided is a guide only. BuySpares accepts no liability for any problems occurred while attempting any advice shown. If in any doubt contact a qualified repair service.